How to Reduce Your Air Conditioners Energy Usage

Nowadays, air conditioners have become the best asset to avoid humid summers. It’s getting hotter outside, and if you are like most Americans, you want to get rid of those extra layers of clothing. Instead of spending your summer nights sweating away, try to keep the room cool with the AC.

Air conditioner power consumption

Did you know that air conditioners are a big culprit to your energy bills? Air conditioners heat the rooms they’re running in and then release cold air. All of this requires power which is why we pay higher electrical bills every month. There are plenty of ways to reduce your air conditioner’s power consumption, such as turning it down to only when it’s needed or going for a more efficient model. Each one of these tips has been tried time and time again by many different people.

Air Conditioner electricity cost

Many homeowners face the problem of finding the best way to reduce their air conditioner electricity costs. Generally, the bigger the home and the greater number of rooms that need cooling, the more energy is required. It is only possible to use the unit properly if it is connected in the summertime. So, here we are going to discuss some easy ways by which you can reduce your air conditioner’s power consumption.

  • Omit the outside air

Warm fresh air is like fuel for your air conditioner. If you add it, the ventilating equipment and compressor will work harder to bring cool air to your home or office. But if you remove that fresh air, the system won’t have to work as hard because it already has enough oxygen. So, if possible, reduce or avoid introducing fresh air into your AC system.

  • Avoid thermostats from hot areas

The thermostat is generally located in the air conditioner. Ensure the room temperature is close enough to the thermostat to allow it to function properly. If you live in a warm area, don’t put the thermostat in hot places such as high on a wall or above ceiling fans. Ensure that most of the room is occupied by your favorite furniture, or hang any items on the walls close enough to the heating/cooling unit on which your air conditioner will mount to ensure the proper functioning of the unit over time.

  • Air vents installation

For your air conditioner to know how much cool air it should be pushing out, you need to have return air vents in every room. These can be small holes in the ceiling or ducts cleaned with filters that direct the air through the house. If you don’t have them, your unit will continue operating at low-efficiency levels because it doesn’t know how hot or cold rooms are compared to others around it. This ensures that the unit only turns on if necessary, meaning less energy consumption and more comfort for your family.

  • Prevent duct leakage

Even the best air conditioners can’t perform well when there is a leak or blockage in the ducts. If you see condensation on the outside of your water-cooled unit, there may be a leak in the system, and it’s wasting energy. The most common place to check is at the top of the ducting system, just above the wall corners on each side of your house. This can also lead to the energy consumption of your AC.

  • Put the vent far from the window

The first thing to consider is whether you are going to put the vent near your window. How much should the temperature of the air drop when the heat rises inside? If you put them close together, then the temperature of warm supply air will quickly become cold supply air. In other words, try to place the supply vent far from the window to avoid high electricity consumption.

  • Use a highly efficient Air Conditioner

Most air conditioners are rated based on the energy they consume while running. The higher your home’s rating, the lower your electricity bill. Get an estimate of your air conditioner’s efficiency and compare it to other models to find the most energy-efficient one for you. It is imperative to purchase the most efficient air conditioner to help save energy and money. There are various methods to evaluate the efficiency of air coolers, and it is a subjective analysis.

  • Use quiet mode

Some air conditioners reduce the airflow with the minimum speed of the fan when it is operated in quiet mode. Many people don’t know that the air conditioner operates at the lowest capacity in quiet mode. This is the reason why you should use the quiet mode if you don’t need much cooling, to save energy consumption. Don’t let your air conditioner waste energy. Get the most cooling power for less when you lower the fan speed to quiet mode.

  • Good air distribution

The supply vents are used to let hot air out of the A/C while letting cold air in. These vents are designed to be placed in a straight line so air can flow in each direction. Make sure to place the supply vents evenly and stay away from their corners because you might not feel their coldness. Others may set their air conditioner to a lower temperature, and it will consume high power. So, make sure supply vents run parallel to each other and across the room to have a good distribution of cold and hot air.


The above points must have given you a brief knowledge about how to reduce the energy consumption of your Air conditioner. If you are looking for Air Conditioning Maintenance in California, We will help you with this solution. Our company provides high-quality service at an affordable price. So, look no further and contact us now to make your space cool.

Leave a Reply

Your email address will not be published. Required fields are marked *